Faucet Repair & Installation in Friendswood, TX
Dripping kitchen faucet, loose shower handle, or ready for a full fixture upgrade? Our licensed plumbers stock Delta, Moen, Kohler, Pfister, and American Standard cartridges on the truck.
A single dripping faucet in a Friendswood home wastes about 3,000 gallons per year — more if the drip is faster than one drop per second. Beyond the water cost, dripping fixtures scale fast in our hard-water region, and a worn cartridge almost always fails completely within 12–24 months of starting to drip. Faucet repair is one of the most straightforward plumbing calls we handle, and the one most homeowners wait too long on.
We repair every major brand sold in Greater Houston and keep OEM cartridges for Delta, Moen, Kohler, Pfister, and American Standard on every truck. For replacements, we install customer-supplied fixtures from any of those brands at a flat installation rate so you can shop the sales at Home Depot, Lowes, or Ferguson without worrying about the install cost.
Signs your faucet needs attention
- Constant drip from the spout even when fully closed
- Water seeping around the handle base
- Low or uneven water flow at a single faucet
- Hot or cold not reaching full temperature
- Handle feels loose, wobbly, or stripped
- Visible green corrosion or white mineral crust around the fitting
- Water pooling in the sink cabinet under the fixture
- Sprayer or diverter not switching properly
- Faucet 10+ years old and showing multiple issues
Our Process
The same steps on every job — from a $189 drain clear to a $9,000 whole-house repipe.
- 1
Identify brand and model
We photograph the fixture, identify the manufacturer and model, and confirm the exact cartridge or part number needed.
- 2
Flat-rate quote
Repair pricing is written before we start. Simple cartridge swap: $109–$189. Complex internal rebuild or seat/spring kit: $189–$289.
- 3
Repair
Shut off at the angle stops, extract the cartridge or valve, replace with OEM part, re-grease, reseat, test for leaks at every connection.
- 4
Test and clean
Full flow test both hot and cold, drip test for 10 minutes, cabinet left clean, old parts hauled away.
Your Faucet Repair Appointment, Step by Step
Before we arrive
A licensed dispatcher confirms your address, describes what our tech will do first, and gives you a firm arrival window. For emergencies inside 77546 we hold a 45-minute promise; scheduled faucet repair visits get a 2-hour window.
On the truck
Your assigned Master Plumber arrives in a branded vehicle stocked with common faucet repair parts — Delta, Moen, Kohler, Rheem, Bradford White, Uponor PEX-A — so most jobs finish in one visit without a supply-house trip.
Before work starts
You get a written flat-rate price in your hand covering labor, materials, permits (when required by the City of Friendswood), warranty terms, and cleanup responsibility. You approve in writing before we lift a wrench.
What We Service
What Affects Your Price
We don't publish fake prices to trick you into calling. We do publish the honest factors that drive real cost — so when we hand you a written quote, you know why.
Cartridge availability
OEM Delta/Moen/Kohler cartridges are on-truck ($30–$80 part cost). Rare or discontinued cartridges may need a Ferguson supply-house trip (added $45–$90).
Access
Reach-under cabinet work on a standard sink is quick. Pedestal sinks, wall-hung lavatories, and tight shower valves add 15–45 minutes.
Shut-off condition
If the under-sink angle stops will not close for the repair, we replace them ($65 each) before working on the faucet.
New-fixture complexity
A single-hole faucet installs faster than a widespread 8-inch three-hole set. Pot fillers and touchless faucets add power and electronic connections.
Why This Matters in Friendswood, TX
Our hard water in Friendswood (12–15 grains) means faucet cartridges wear out faster than in Austin or Dallas suburbs. A Moen Posi-Temp cartridge that lasts 15 years on soft water commonly fails at 8–10 years in Friendswood. Pair your faucet repair or new install with a whole-house water softener and your next cartridge replacement is usually 10+ years out.
Why Friendswood Homeowners Trust Us for Faucet Repair
Friendswood Plumbing Co. has been serving Friendswood and Greater Houston for 22 years — 487+ verified reviews at a 4.9-star average, Texas Master Plumber License #M-40217, and a 45-minute response inside Friendswood 77546/77549. Every faucet repair job we do carries a written 2-year workmanship warranty and a firm flat-rate price handed to you before we start.
Master Plumber on every faucet repair job
Faucet Repair & Installation is diagnosed and performed by a licensed Texas Master Plumber — never a sub, never a trainee working unsupervised.
Flat-rate written price before we start
You see the full faucet repair price in writing — labor, parts, permits, cleanup — before any work begins. No hourly meter running, no surprise upcharges.
Trucks stocked for faucet repair
Kitchen faucet repair & replacement, Bathroom lavatory faucet repair & replacement, and the common failure points — stocked on our trucks so most faucet repair jobs finish in one visit.
2-year workmanship warranty
Every faucet repair repair carries a 2-year written workmanship warranty, honored by the same crew. Manufacturer warranties pass through on parts.
Related Services
General Plumbing Repair
From a dripping faucet to a slow shower drain, our Texas Master Plumbers arrive on time with the parts to solve it today.
Water Filtration & Softeners
Friendswood water runs 12–15 grains hard.
24/7 Emergency Plumber
Real Master Plumbers on call — nights, weekends, holidays, hurricane season.
Faucet Repair Across Friendswood & Greater Houston
Our faucet repair crews dispatch daily from our Hunters Lane hub in Friendswood — 45-minute response inside Friendswood 77546/77549. We serve the entire Tier 1 corridor along FM 518 and FM 528: Friendswood 77546 and 77549, Pearland, Alvin, Manvel, Webster, and Brookside Village. Extended service reaches Galveston County, south Harris County, north Brazoria County, and Fort Bend County — 39+ cities in total. Every job runs by the same Texas Master Plumber, at the same flat-rate pricing, with the same 2-year written warranty.
Ready for Faucet Repair in Friendswood?
Every faucet repair job we do is priced flat-rate in writing before we start, performed by a Texas Master Plumber (never a sub), and backed by a written 2-year workmanship warranty. If you have an active emergency, skip the form and call — a licensed dispatcher answers on the first ring, 24/7.
Frequently Asked
How much does faucet repair cost in Friendswood?
A standard cartridge-replacement repair on a Delta, Moen, or Kohler faucet runs $109–$189 installed. More complex rebuilds (shower valve seat/spring kits) run $189–$289. Full faucet replacement with a customer-supplied fixture is a flat $249–$349 depending on configuration.
Do you install faucets I bought at Home Depot?
Yes. We install any major-brand faucet (Delta, Moen, Kohler, Pfister, American Standard, Grohe, Hansgrohe) at a flat rate. We do not install clearance or off-brand faucets we cannot warranty.
How long does a faucet replacement take?
Standard kitchen or lavatory faucet replacement runs 45–75 minutes. Widespread 3-hole sets, pot fillers, and touchless faucets with power take 90–150 minutes.
Can I DIY a dripping faucet repair?
If you have the exact OEM cartridge and the right internal tools, often yes. The reason most homeowners end up calling is misidentified cartridges — a $65 part turns into three Home Depot trips. We arrive with the right part on the truck.
Will a water softener help my faucets last longer?
Yes — significantly. A properly-sized whole-house softener extends cartridge life 30–50% in Friendswood and eliminates the mineral crust that fouls spray heads and aerators.
45-minute response inside Friendswood 77546/77549
Dripping Faucet in Your Friendswood Home?
Call (831) 290-4327 for same-day faucet repair or a flat-rate replacement quote.